SPECIALTIES | PRODUCTS FOR SPECIFIC USES
Solutions for algae. Clarifiers for pool water. Solutions for stains and encrustations. Other solutions for swimming pools. Solutions for water losses.
E-110 – LO-CHLOR POOL ALGAECIDE
Algaecide is a high strength long life algaecide for swimming pools, it will control and preventthe growth of algae in swimming pool water for up to 6 months. It is also ideal for spring open up and both summer and winter maintenance.
Algaecide is a high strength long life algaecide for swimming pools, it will control and prevent the growth of algae in swimming pool.
SEE
GENERAL INSTRUCTIONS
If algae is present prior to application it is recommended that it is treated before adding Lo-Chlor Algaecide. Shock dose the pool with a suitable chlorine shock and run filtration for 24 hours.
1. Ensure bathing has ceased before applying this product.
2. Adjust pH to 7.0-7.2.
3. Clean pool thoroughly by brushing the walls and floor, vacuum the pool and filter as normal.
4. Following the dose rate table add the required dose to water in a suitable clean plastic bucket.
With the circulation running evenly distribute around the pool. Note the increased dose rate for the treatment of algae.
5. Continue to circulate the pool water for 24 hours, do not add any other chemicals during this period.
6. Maintain pH between 7.2 – 7.6.
7. Bathing can resume after 1 full turnover of swimming pool water, typically 4-5 hours.
E-301/302/305- ALGAKILLER
The most effective concentrated shock allergic on the market. Destroy Black Algae and any other algal blooms in 24 hours. With lasting preventive effect.
SEE
Dosage: 1 Liter for every 30-50 m3 of water as a maximum dose, depending on the type of algae and its proliferation.
To avoid risks to people and the environment, follow the instructions for use.
Rinse each container you use vigorously three times, pouring the wash water into the pool. Empty containers must be deposited at clean points or at points established by the local authority in accordance with their respective ordinances.
E-133 – STARVER X
Starver X is a safe and effective superior strength phosphate remover for swimming pools, fountains and ponds.
Starver X is a curative solution designed to remove high phosphate levels. One litre will remove up to 6000 ppb (6ppm) of phosphates from a 50,0
SEE
This highly concentrated formulation from Lo-Chlor Chemicals is a uniquely formulated phosphate remover which removes high levels of phosphates than any other product.
Features & Benefits
— Removes up to 6.0 parts per million (6000 parts per billion) of phosphates
— Natural composition of unique polymers and rare earth compounds
— Enhances water clarity within 24 hours
— Increases efficiency of all sanitisers
— Increases the efficiency of salt water chlorinators
— No need to vacuum (does not settle out in pool)
— No effect on filter pressure
— Compatible with all pool treatments and equipment
Dosage
Add 200mls per 10,000 Litres directly to the skimmer box
E-131/130 – STARVER
Designed to be used as a maintenance and preventative solution this unique formulation is highly concentrated.
Starver® is most effective when treating phosphate levels below 2ppm (2000 ppb). For higher levels use Lo-Chlor Starver® X.
SEE
Benefits:
– Removes phosphates (algae nutrients)
– Without phosphates, algae cannot grow
– New formulation
– Dramatically clarifies water giving instant satisfaction
– Does not cloud water (unlike other phosphate removers)
– Minimal filter pressure increase (see important notes below)
– Enhances chlorine production
– Enhances the performance of ALL other pool chemical treatments
– Compatible with all sanitisers (including Nature 2 and Ionisers)
E-806/805/- MIRACLEAR CLARIFIER
Natural clarifier based on a natural polymer called Chitosan. It is specifically designed to remove body fats, oils and suntan lotion along with dissolved metals and dead algae spores.
SEE
MIRACLEAR Clarifier is a fast acting natural clarifier based on a natural polymer called Chitosan. It is specifically designed to remove body fats, oils and suntan lotion along with dissolved metals and dead algae spores.
It should be used in every newly filled pool and is the ideal product for the pool owner who wants to add a polished look to a dull looking pool, whilst improving filter efficiency.
This product is both non-toxic and biodegradable and can be used with all recognised sanitisers.
E-802/802/- MIRACLEAR CUBE
Miraclear Clarifier Cubes are unique clarifyingagents that produce outstanding water clarity, normally within 24 hours.
SEE
Miraclear Clarifier Cubes are unique clarifying agents that produce outstanding water clarity, normally within 24 hours. They work by grouping together microscopic particles that normally pass through the filtration system. The cubes
are suitable for all types of filtration including cartridge filters.
ADVANTAGES OVER OTHER PRODUCTS:
– Non-toxic and fully bio-degradable.
– Keep a pool sparkling for 30 days.
– Removes dissolved metals (iron, copper & manganese).
– Aid in the removal of phosphate.
– Hot water stable and the only cubes suitable for any type of filtration system (cartridge, D.E. or sand).
– Leave no messy residue.
– Ease of use – no requirement to premeasure.
– Ideal for holiday times when the pool is not being use
E-701/705/- MAXICLEAR
It is a new generation clarifier for turbid pool water. For a Fast recovery of water, after chlorine shock-treatments , after storms or an intensive use of the pool.
SEE
It is a new generation clarifier for turbid pool water.
For a Fast recovery of water, after chlorine shock-treatments , after storms or an intensive use of the pool.
PROPERTIES:
– It has a Fast acction, acts betwen 6 and 8 hours without sediment in
the bottom , that is why it is not necessary to use the bottom-cleaner.
– It has excellents results , leaves the pool with crystalline brightness
– Great effectiveness in low doses of apply. ( usual dose 100cc x 50 m3
of water )
– It eliminates by coagulation and using the filter all general turbidity , as
pollen, organic remains and metallic salts.
– Its effects are lasts several weeks.
– It can be used with another Chemicals tratements of water.
– It is compatible in liner swiming pools and pools with salt chloration
E-990- NO MORE SCALE
No More Scale is designed to reduce and soften scale formation on both pool interiors and Salt Chlorinator Cells.
SEE
Use of No More Scale has many advantages including:
– Phosphate Free – does not contribute unwanted phosphates like alternative products.
– Prevents metal staining.
– Prevents corrosion of pool heating equipment.
– Prevents scum deposits on pool surfaces.
– Prevents plugging of filters.
GENERAL INSTRUCTIONS
1. No More Scale should be added at the start of the season during spring open up.
2. Calculate the required amount of No More Scale from the dose rate below.
3. Ensure that the pump and filter are running as normal.
4. Mix the calculated dose in a clean bucket with water and evenly distribute around the pool. DO NOT ADD VIA THE SKIMMER.
5. Filter as normal.
DOSE RATES
INITIAL & FINAL: 500mls per 50,000 litres of pool water.
MONTHLY MAINTENANCE: 100ml per 50,000 litres of pool water.
After the Initial Dose has been added continue to apply the product on a monthly basis to ensure constant scale protection all year round. To remove scale discolouration on waterline tiles, raise the water level above the waterline
level and maintain for at least 3 weeks. A final treatment is recommended when the pool is winterised or will be idle for a long period of time. The main causes of scale formation are generally high levels of calcium and poor water balance,
metal stains form due to incorrectly balanced water.
E-900- INSTANT FILTER CLEANER
Instant Filter Cleaner quickly removes debris, oils, body fats and dirt utilising a unique “No Soak” formula. This product is suitable for use on both hot tub and swimming pool cartridge filters.
SEE
Instant Filter Cleaner quickly removes debris, oils, body fats and dirt utilising a unique “No Soak” formula. This product is suitable for use on both hot tub and swimming pool cartridge filters.
E-181/180 – GRES &VINYL CLEANER
Degreasing cleaner without foam for the waterline in pools of concret, fiberglass and liner. Easily remove dark grease stains on the water line.
SEE
Degreasing cleaner without foam for the waterline in pools of concret, fiberglass and liner. Easily remove dark grease stains on the water line.
E-915- CLEAN CELL
Remove calcium scale deposits from salt chlorinator cell.
SEE
Remove calcium scale deposits from salt chlorinator cell.
E-905- PROTECTOR PLUS
Reduces and softens chlorinator deposits.
SEE
PROPERTIES
• Reduces and softens deposits on salt chlorinator cells. So much easier to clean.
• Increase chloride concentration in water – enhancing chlorine production.
APPLICATION RATES
• Initial Dose: 5 litres per 50,000 litre pool.
E-120- LEAK SEALER
Leak Sealer is designed to seal minor leaks in swimming pools where the water loss does not exceed 2.5cm per day in 60,000 litres of water.
SEE
The water loss sealant in concrete and fiberglass pools. Without emptying Either the loss in the glass or in pipes.
It is capable of eliminating water losses of up to 2.5 cm. diary.
Dose: 1 liter x 50m3. The original and really effective fissure sealer.
Water losses in concrete or fiberglass pools, tanks and spas.
Both in the glass and in pipes.
1 Liter treats 50 m3
E-175- MS AQUA PISCINAS
Elastic, MS polymer-based adhesive of new generation. Moisture curing. SPECIAL USE FOR SWIMMING POOLS.
SEE
Elastic, MS polymer-based adhesive of new generation.
Moisture curing. SPECIAL USE FOR SWIMMING POOLS.
APPLICATIONS
- Elastic bonding and/or sealing in polyester shell and above-ground pools.
- Bonding and sealing of mosaic tiles, swimming pool tiles, decorative elements, skimmers and cracks.
- Sealing of joints and bonds.
E-1100- Mr. STICKY’S
Mr. Sticky’s Underwater Glue is an amazing adhesive that can actually be applied UNDERWATER.
SEE
It bonds well to plastics, tile, concrete, stone, fiberglass, rubber, wood and metal. This adhesive is popular for repairs around ponds, pools, spa and marine applications. If it sticks underwater . . . it will bond almost anywhere!
Currently available in a 30 gram manual dual syringe system that dispenses an equal amount of the product that then can be mixed for use.
COLOUR WHITE: Working time is 15-30 minutes, handling time 1-2 hours and cure time 24 hours. Can be applied above or below water.You can use this product to fill gaps, allowing bonding of a smaller fitting into a larger one. With Mr. Sticky’s glue PVC pipe can be bonded together without the use of fittings.
E-199- NO MORE BUGS
Reduces the surface tension of the pool water, completely ridding the pool surface of floating insects. With reduced surface tension insects cannot float and sink to the bottom of the pool where they are either filtered or vacuumed to waste.
SEE
Reduces the surface tension of the pool water, completely ridding the pool surface of floating insects. With reduced surface tension insects cannot float and sink to the bottom of the pool where they are either filtered or vacuumed to waste.
GENERAL INSTRUCTIONS
1. For best results add No More Bugs as close as possible to the problem area of the pool.
2. Repeat application if necessary.
3. DO NOT add to the skimmer basket.
4. Insects will sink to the bottom of the pool. Filter or vacuum to waste.
DOSE RATES
Add 100ml of No More Bugs per 10,000 litres of pool water.
E-171- BIO-ACTIVE
Cyanuric Acid Reducer.
SEE
• No need to drain your pool dueto high cyanuric acid.
• Eliminates chlorine lock dueto high cyanuric acid.
• Allows sanitizer to be effective.
• Advanced biocatalyst technology.
• Nontoxic, nonallergenic, nonpolluting.
E-1205/1225- AQAPHOS
Prevents breakdowns in injection systems of sodium hypochlorite.
Bag: 5 and 25 Litters.
SEE
Prevents breakdowns in injection systems of sodium hypochlorite.
E-1301/1302/1305 – ACTIPLUS
Activator and enhancer of chlorine, bromine and oxygen. Accelerates water recovery and the elimination of algae and bacteria.
SEE
Activator and enhancer of chlorine, bromine and oxygen. Accelerates the recovery of water and the elimination of algae and bacteria.
Chlorine, bromine and oxygen activator and enhancer. It reduces the consumption of chlorine and prevents the growth of algae. In case of algae presence, it accelerates the recovery of water. Solid product of high concentration.
E-140/142 – HIDRASLIP
Long-lasting silicone lubricant designed to protect hydraulic fittings and rubber seals preventing deterioration.
SEE
Long-lasting silicone lubricant designed to protect hydraulic fittings and rubber seals preventing deterioration.
Long-lasting silicone lubricant designed to protect hydraulic fittings, rubber seals, water and wear. Extends the life of joints and accessories. It does not go with the water.
